L&B FLUID EQUIPMENT

Principle of equipment

High shear dispersive emulsification is the efficient, rapid, uniform distribution of one or more phases into the other continuous phase, and in general each phase is mutually incompatible. Due to the high tangential speed and high kinetic energy caused by the high-speed mechanical rotation, the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction and impact in the narrow gap between the stator and the rotor. Tearing and turbulence, so that the immiscible solid phase, liquid phase, gas phase in the appropriate mature technology and the right amount of additives under the action of instantaneous uniform fine dispersion emulsification, after high-frequency cycle, and finally get stable Of high-quality products.

Equipment Selection Table:

model	capacity（L/H）	power（KW）	speed(RPM)
BRD-100	30-100L	2.2KW	2800
BRD-120	100-200L	3.0KW	2800
BRD-120A	100-300L	4.0KW	2800
BRD-140	300-600L	5.5KW	2800
BRD-140A	300-800L	7.5KW	2800
BRD-160	300-1000L	11KW	2800
BRD-160A	800-1300L	15KW	2800
BRD-180	800-1500L	18.5KW	2800
BRD-200	1000-2000L	22KW	1400
BRD-220	1500-2500L	30KW	1400
BRD-220A	1500-3500L	37KW	1400
BRD-240	1500-5000L	45KW	1400
BRD-270	3000-7000L	55KW	1400
BRD-290	7000-12000L	75KW	1400

Note:
* The upper limit of processing capacity in the table refers to the data measured when the medium is "water";
* If the medium viscosity or solid content is high, it is recommended with pipeline high shear dispersing emulsifier with the use;
* If high temperature, high pressure, flammable and explosive, corrosion and other special conditions, the need to provide detailed and accurate parameters;
* The data in this table are subject to change without notice, the correct parameters to provide the prevail in kind.